The TECHT Hush Bolt is designed to improve the overall efficiency, sound signature and smoothness of operation in the Empire Sniper Pump Marker. TECHT's Hush Bolt Series for the Empire Sniper Pump Marker utilizes their "Even-Flow" venturi face technology. This "Even-Flow" venturi face along with our Sweeping Air Diversion Ramp allows the Hush Bolt to obtain optimal efficiency, while quieting the sound signature of the marker significantly.
The Hush Bolt achieves better efficiency by capturing and utilizing air that is otherwise wasted. The two rear most o-rings capture all of the air released and forces it through the bolt to fire the ball, and the front o-ring seals in the breach to ensure that the air cannot escape anywhere except down the barrel propelling the ball. The Hush Bolt also features continuous cuts through to the face of the bolt to ensure less friction when making contact with the ball detents.
So what makes the Hush Bolt for the Sniper different from stock? The TechT Hush Bolt for the Sniper Pump has been fitted so as to produce less drag on the o-rings but still keep a good seal to maximize efficiency. This means a smoother pump without having to sacrifice any efficiency. The hush style face and o-ring placement also aids in knocking down the sound signature of the marker.
* Utilizes the marker's stock bolt pin. Bol.t pin not included.
Boost your Etha marker's performance with a TechT Etha MRT Bolt System!
The TechT MRT(Mass Reduction Technology) Etha Bolt has been engineered for ultimate gas efficiency and consistency. By reducing the weight of the bolt by over 58%, TechT was able to produce a much smoother cycle while gaining another 20-25 fps. The TechT Etha MRT Bolt utilizes the stock Etha Bolt rubber tip (not included). As with all of TT's products it carries a Full Lifetime Warranty.
The TechT MRT Etha Bolt utilizes a slightly softer spring which was made specifically for new lighter weight. TechT's engineers saw increases of 20-25 FPS gain when changing out the stock bolt for the MRT Bolt. This increase in efficiency is due to the combination of the lighter overall weight and softer spring. The sound signature is also greatly reduced when adding the MRT Bolt due to the lower operating pressure and internal air distribution.
Get smoother trigger speed now with a Techt A5 Fang Trigger!
This is what your A5 has been missing...
The TechT Fang Trigger is the highest quality billet aluminum trigger available for the Tippmann A5, A5 with Response Trigger or older style Egrip (not the Selector Switch model).
The TechT Fang triggers are three point adjustable, and allow for the shortest trigger pull possible. Walking the trigger will be easier than ever before. No other Tippmann A5 trigger offers this level of control or adjustment. You will be able to fine tune your mechanical and electronic trigger pull to be shorter than you ever thought possible. Set screws are included with each trigger to allow for setting up the perfect trigger pull. TechT's Flexi Guard rubber trigger guard allows more room for trigger walking and gloved fingers as well as being nearly indestructable!
TechT A5 Fang Trigger features:
- Dual roller bearings
- Multiple trigger stops
- Pre-travel, post-travel and microswitch activation point adjustment
- Response Trigger adjustments
- Flexi Guard trigger guard included
This trigger is not designed to work with 2011 A5's that have the "mode selector switch" on the trigger frame. If your A5 has a mode selector you need TechT's X7 and A5 HE Trigger.
The TechT Squishy Paddles DS Upgrade allows for more balls to be in the bottom of the Cyclone Feed. By putting more balls in the bottom of the loader it means that fewer shots will be skipped. Along with the Double-Stack top paddle, they also include the tried and true standard Squishy Paddle Top. You can't find another aftermarket set of paddles with three paddles! Only the TECHT Squishy Paddles DS give you the option of which top you want to use. The "DS" or Double-Stack Feature allows for two stacks of balls to be lined up and ready to be loaded. This means no skipped shots for the first 8-10 shots. This is great for people who fire in bursts and want less skipped shots.
Interlock Technology ensures that TechT paddles, once installed, don't go anywhere! By softening the material that holds on to the shaft, you run a risk of the paddles "stripping-out". By using the inter-lock system and TechT's special blend of plastic the Squishy Paddles DS are guaranteed to get the job done! The Squishy Paddles also come with a teflon washer to be placed between the paddles and Cyclone Housing to ensure frictionless operation.
The TechT E-Z View Cyclone Feed Housing lets you monitor how everything is working!
Do you want to save time and frustration? The TechT E-Z View Clear Cyclone Feed Housing Kit replaces the solid black stock loader body on your Cyclone Feed with a see through unit. You now can monitor how your system is functioning, making any troubleshooting or inspecting parts for wear and tear effortless and instant. Don't be fooled by poor quality look-alikes; the TechT EZ View Cyclone Feed Housing is built to take a beating without cracking or shattering. This complete housing kit includes both the smoke translucent feeder housing and the clear bottom plate.
TechT EZ View Clear Cyclone Feed Housing Kit features:
Increase efficiency in your Phenom with a TechT MRT Bolt System!
The Techt MRT (MASS REDUCTION TECHNOLOGY) X7 Phenom Bolts have been engineered with efficiency and consistency as the most crucial design elements. TechT's MRT system minimizes excess weight by removing portions of the bolt which are not utilized. The spiral cut pattern allowed TechT to lengthen the channels of material to be removed, resulting in lower weights and a really cool look! A soft rubber tip helps reduce breakage on fragile paint by cushioning the impact of the bolt to the paintball.
Included with the TechT MRT Phenom Bolt are a set of TechT Phaze 5 Cyclone feed Air Fittings! These replace your stock Cyclone pressure hose fittings with a durable stainless steel units to increase air flow for more reliable operation.
TechT X7 Phenom MRT Bolt features:
- Lighter weight for better efficiency
- Increases consistency
- Rubber bolt face for softer contact with paintball
TechT Squishy Paddles Upgrade for Tippmann Cyclone Feeds are gentle on brittle paint!
TechT's Cylone Feed Squishy Paddles are designed to help players using any Tippmann Cyclone Feed eliminate ball breakage due to cold temperatures, brittle paint and high feed rates. The soft arms flex around the paintball instead of crushing it for smooth loading into the breech.
TechT Squishy Paddles Upgrade for Tippmann Cyclone Feeds features:
- Soft rubber material
- More gentle on fragile paintballs
- Interlocking design to keep paddles properly aligned
- Teflon washer to prevent binding against Cyclone housing
The Angel LCD is truly a legend in the sport. Its is the marker that put the Angel in the limelight. Their style and abilities were light years ahead of the competition in the late 90's and early 2000's. Since the LCD, WDP has made small performance enhancing changes to the Angel's design, however the core operating principals and design have stayed the same. While this video may be tailored toward the LCD, its ideas can be carried over to any the Angel markers. If you own an newer Angel, and you watch this video, you have a solid foundation of knowledge to work on your Angel. Even though this video may not be made specifically for your particular model Angel, it will definitely give you the confidence and attention to detail you need in order to work on an Angel. This video may not be perfect of every Angel, but it will greatly help with you understand how to work on an Angel regardless what model you own.
What it covers:
Complete Tear Down
Adjusting the Hammer, LPR, and Inline Reg for Max Performance
Save maintenance time with the TechT EZ View Cyclone feed Bottom Plate!
Want a simple upgrade that will save you lots of playing and maintenance time? The Techt E-Z View Clear Cyclone Feed Bottom Plate replaces your stock feed's plate with a crystal clear option. With the TechT Clear Cyclone Feed Bottom Plate you can now instantly monitor how the ratchet and axle are functioning for faster and easier diagnosis. Unlike other cheap models, the TechT Bottom Plate is built to last and comes with TechT's Limited Lifetime Warranty!
Lubrication is the life giving blood to any paintball marker. No matter if you shoot, your marker REQUIRES lubrication.
Since 2006, TechT has been testing various recipes and mixtures looking for paintballs' "perfect lubricant".
For paintball applications TechT determined that the other "paintball greases" were just too thick. It's the thickness of any grease that causes what they call "stiction". This is were the thickness/tackiness of the grease actually holds the part in one place. This tackiness slows down your marker and makes for less consistency and efficiency.
TechT's goal was to produce a SUPER SLICK grease, that a wasn't too thick, but wasn't too thin either. Gun Sav is that perfect balance.
Gun Sav is specially blended for minimal "stiction", and maximum part movement. Gun Sav adheres to the part, and stays were you put it.
There's no need to glob this grease on, a little bit goes a long way.
Products are offered on a limited quantity basis at exceptional pricing.
Customers will be notified in a timely fashion if an item is out of stock.
Shipping is only 18% on most products on orders over $100 to the 48 contiguous states.
S&H is $19.95 on all orders under $100 to these states.
Shipping to Alaska & Hawaii is 28%.
Shipping to all countries outside the USA will be directed through Bongo International.
Puerto Rico, & APO/FPO will incur overseas rates.
DollarDays now ships thousands of products from Canada to Canada.
Once you register from Canada, just click on the banner with the Canadian flag and merchandise in warehouses in Canada become available.
All orders shipped outside the USA must be at least $100.
If you require delivery to other locations please call for rates.
Additional Freight charges may apply on heavy or bulky products.
"Closeout Corner" area products purchased are "final sales" and can not be returned.
Partial shipments may occur.